Home > Support > Orders

Firewall exceptions: AT&T Business Voice

This article lists the TCP and UDP ports used by the AT&T Business Voice (ABV) device for configuring a firewall to allow access for inbound and outbound traffic to the provisioning servers.

Recommended: We highly recommend that the unit is placed IN FRONT of the firewall. Communication would occur direct from the VOIP/Alarm/Fax to the SIP, provisioning, and other ABV servers which would separate it from your internal network.

For BEHIND the firewall, the exceptions below are needed to your firewall(s).

Inbound and outbound traffic rules

Purpose | Network address | Protocol | Destination ports

RTP STANDARD VOICE

12.194.39.213

12.194.39.214

12.194.156.229

12.194.156.230

12.194.193.37

12.194.193.38

12.194.127.101

12.194.127.102

12.194.42.85

12.194.42.86

12.194.42.21

12.194.42.22

12.194.193.85

12.194.193.86

12.194.193.213

12.194.193.214

12.194.156.69

12.194.156.70

12.194.42.149

12.194.42.150

12.194.156.149

12.194.156.150

12.194.127.165

12.194.127.166

12.194.193.149

12.194.193.150

UDP/ sRTP
20000-40000
RTP ENHANCED MODEM/FAX/ALARM
128.254.140.0 / 22
SIP / UDP
10000-65535
128.254.140.0 / 22
SIP / UDP / sRTP

Outbound only traffic rules

Purpose | Network address | Protocol | Destination ports

AGENT AP

216.12.231.60/32

216.12.246.60/32

TCP
5092
MANAGEMENT

142.215.242.0/24

12.44.197.0/24

128.254.140.0/22

TCP
443, 8883
WAN FAILOVER

8.8.8.8/32

1.1.1.1/32

ICMP
DNS

8.8.8.8/32

8.8.4.4/32

1.1.1.1/32

TCP & UDP
53
NTP
0.0.0.0/0
UDP
123
SIP/RTP STANDARD VOICE

12.194.39.213

12.194.39.214

12.194.156.229

12.194.156.230

12.194.193.37

12.194.193.38

12.194.127.101

12.194.127.102

12.194.42.85

12.194.42.86

12.194.42.21

12.194.42.22

12.194.193.85

12.194.193.86

12.194.193.213

12.194.193.214

12.194.156.69

12.194.156.70

12.194.42.149

12.194.42.150

12.194.156.149

12.194.156.150

12.194.127.165

12.194.127.166

12.194.193.149

12.194.193.150

TCP & UDP
5060, 5090-5091
RTP STANDARD VOICE

12.194.39.213

12.194.39.214

12.194.156.229

12.194.156.230

12.194.193.37

12.194.193.38

12.194.127.101

12.194.127.102

12.194.42.85

12.194.42.86

12.194.42.21

12.194.42.22

12.194.193.85

12.194.193.86

12.194.193.213

12.194.193.214

12.194.156.69

12.194.156.70

12.194.42.149

12.194.42.150

12.194.156.149

12.194.156.150

12.194.127.165

12.194.127.166

12.194.193.149

12.194.193.150

TCP
5096-5097
RTP ENHANCED MODEM/FAX/ALARM

12.44.197.0 / 24

12.156.112.0 / 24

128.254.140.0 / 22

TCP
7160, 10000, 10100
PMOSS Collector
144.160.137.152
UDP
5070

For static IP assignment:

ABV devices support static IP addressing through the implementation of Static DHCP services through the customer's LAN controller (firewall/router/switch/gateway/etc). AT&T does not pre-configure static IP addressing fields in the ABV device. Instead, AT&T will provide the MAC addresses of all ABV devices to the customer's network support team, who can then pre-configure Static DHCP for those MAC addresses in the DHCP server. This allows the customer to directly assign and control the ABV device's IP address and other network settings.

Static DHCP services are standard features to implement on most DHCP servers. Instructions for setting up Static DHCP services on a specific make and model of network controller can be found through any public web search engine.

For more information, contact AT&T Business Voice Technical Support can help after your order has been placed. 1-800-615-0708