AT&T Dedicated Internet (ADI) Technical Verification Checklist
This checklist will assist customers in verifying and understanding critical technical parameters to ensure timely service delivery and successful service activation.
ADI Express
-
Port & VLAN Speeds are the same
-
Default assignment of IP blocks
- WAN /30
- LAN /29
-
VLAN tagging is ARPA only.
-
IP Version is Dual Stack which supports standard V4 addressing
-
The Routing Protocol is STATIC.
-
AT&T Managed router comes with four LAN interfaces.
-
Optical and electrical interfaces are supported as follows:
-
Low Speed (≤ 1000Mpbs)
- 100Base-TX (electrical) - 100Mbps for ADI speeds ≤ 100Mbps and distances ≤ 100 meters between demarcation and customer suite
- 1000Base-SX (multi-mode fiber) - 1000Mbps for distances up to 220 or 550 meters between demarcation and customer suite, depending on the fiber diameter
- 1000Base-LX (single-mode fiber) - 1000Mbps for distances up to 5 kilometers between demarcation and customer suite
-
High Speed (≥ 2Gbps and ≤ 10Gbps)
- 10GBase LR SMF
-
Ultra-High Speed (> 10Gbps and ≤ 100Gbps)
- 100GBase SR4
- 100GBase SR10
- 100GBase LR4
- 100GBase ER4
- 100G OTU4 LR4
- 100G OTU4 ER4
-
Related content
- Change AT&T Dynamic Defense plan
- Add AT&T Dedicated Internet to a single location
- Managed Services Change Orders
- How to Run ADI Reports Using View IP Network Usage Reports
- View and download an AT&T DNS Security Threat Intelligence report for your AT&T Dedicated Internet Service
- Remove AT&T Dynamic Defense from AT&T Dedicated Internet
- Add AT&T Dynamic Defense to AT&T Dedicated Internet
- How to order AT&T Dynamic Defense
- Order Service at Single or Multiple Locations for AT&T Dedicated Internet
- Make changes to AT&T Dedicated Internet Service
- ADI customer readiness & installation
- ADI Delivery and Installation: Welcome to your new service