Home > Support > Trunk Groups

Manage a Trunk Call Routing Scheme

  1. From any page on the portal, select  RESOURCES  from the main menu, then click Trunk Call Routing.
  2. On the Trunk Call Routing List page, click the name of the trunk call routing scheme you want to edit.
  3. Click  Edit  to edit the name. Note: you can't change the default scheme's name.
  4. Under Route Algorithm, select one of these options:
    • Linear selects the group trunk group in listed order, starting at the top.

    • Round Robin selects the group trunk group that immediately follows the last group trunk group that answered a call.

    • % Allocation routes the call based on the percentage of incoming calls assigned to each trunk group.

      Note: This is only available when editing created schemes, not the default scheme.

    • Most Idle reduces caller wait times by selecting the group trunk group with the fewest number of current calls.

  1. Under Maximum Number of Re-Routes, set the maximum number of times a call will be re-routed.
  2. Set  Route Exhaust  to  None  or Trunk Forward:
    • None—Calls that can't be routed to an available user are terminated after the maximum number of re-routes is reached.

    • Trunk Forward—Unanswered calls are routed to the phone number you specify. The phone number you specify can be public, private, or international.

      Note: When you use Trunk Forward, you should place test calls to verify that incoming calls are terminated correctly.

  1. Under Capacity Management, next to Enable, click  Yes  to turn the feature on or No to turn the feature off.
    • If this feature is turned on, under Maximum Active Calls Allowed enter the number of concurrent calls allowed.

      Note: The Maximum Active Calls Allowed setting works with the group trunk group settings for Maximum Concurrent Calls. The setting with the lower number determines the number of concurrent calls allowed for the trunk call routing scheme. For example, if the trunk call routing Maximum Active Calls Allowed is set to 4 and the group trunk group Maximum Concurrent Calls is set to 5, only 4 concurrent calls are allowed.

  1. Click Save.

Delete a trunk call routing scheme

  1. From any page on the portal, select RESOURCES from the main menu, then click Trunk Call Routing.
  2. On the Trunk Call Routing List page under Actions, click Delete.
  3. From the Trunk Call Routing list page, click a trunk call routing scheme name.
  4. On the Trunk Call Routing Details page, click the  Details  tab, then click Delete.