Create a Trunk Call Routing Scheme
You can create call routing schemes to determine how calls are handled. Based on these settings, trunk call routing directs calls to one or multiple group trunks, such as routing calls between two customer service locations.
-
From the main menu, click HOME to open the IP Flexible Reach Portal.
-
Under Trunk Call Routing Search, click Create Trunk Call Routing.
-
Enter a name for your scheme.
-
Under Route Algorithm, select one of these options:
-
Linear selects the group trunk group in listed order, starting at the top.
-
Round Robin selects the group trunk group that immediately follows the last group trunk group that answered a call.
-
% Allocation routes the call based on the percentage of incoming calls assigned to each group trunk group, with a total of 100%.
-
Most Idle minimizes caller wait times by selecting the group trunk group with the fewest number of current calls.
-
-
Under Maximum Number of Re-Routes, set the maximum number of times a call will be re-routed.
-
Set Route Exhaust to None or Trunk Forward:
-
None —Calls that can't be routed to an available user are terminated after the maximum number of re-routes is reached.
-
Trunk Forward —Unanswered calls are routed to the phone number you specify. The Trunk Forward phone number can be public, private, or international.
Note: When you use Trunk Forward, you should place test calls to verify that incoming calls are terminated correctly.
-
-
Click Save.
Note: After creating a new trunk call routing scheme, you need to assign group trunk groups to the scheme before it will work.