Home > Support > Call Features

Sequential Ring

Use Sequential Ring to create a list of up to 5 phone numbers that will be called if the original number isn’t answered.

Note: The Sequential Ring feature takes priority over Simultaneous Ring if both features are active.

Add or edit Sequential Ring criteria

  1. From any page in the portal, select  HOME  from the main menu.
  2. In the Inbound Features tab, next to Sequential Ring, check your status.
  1. Follow the steps below to use the default criteria or add custom criteria.

Note: You can only delete the criteria you created, not the default criteria.

Add custom criteria

  1. In Description, enter or edit the criteria name, then set Status to Active. To use the feature, at least one condition must be active. To set up criteria for use at another time, set the status to Inactive.

  2. Under Current Schedule, select an option:

    • Default Schedule
    • Custom Schedule - For a custom schedule, click Find Schedule, then pick a schedule.
  3. To set Ring on call(s) from select an option:

    • Any Phone Number — If there is no answer, the call is forwarded to the next number in the sequence.

    • Following Phone Numbers —Specifies which calls ring and are forwarded through the specified sequence.

      • To specify a phone number, select one or more of these settings: Any Anonymous Number, Any Unavailable Number, or Specific Number(s). For Specific Number(s), select Add a Number, then enter a phone number.

      • Add up to 12 phone numbers, each with a maximum of 20 digits.

      • For U.S. public numbers, enter 10 digits.

      • International numbers must start with  +  or 011.

      • Wildcard characters are allowed:

        • An asterisk (*) replaces any sequence of digits at the end of a number.
        • A question mark (?) replaces any single digit within a number.
      • When you finish adding numbers, click Add.

  4. To create exceptions to rules, select Add Criteria. On the Add Sequential Ring Criteria page, repeat steps 1-2, then select Do not Ring on Calls from:

    • Any Phone Number
    • Following Phone Numbers
    • Any Anonymous Number
    • Any Unavailable Number
    • Specific Number(s) – For Specific Number(s), select Add a Number.
  1. Select Add, then Enable with Save.
  2. To see if the status is enabled, click Back to Sequential Ring Settings.

Sequential Ring settings

After you set Sequential Ring criteria, follow these steps to set the sequential ring settings.

  1. You can choose one of these options:

    • Ring my number first

      • Next to Ring my number <x> times, select a value from the list.
      • You can select Continue the search process if the base location is busy/unavailable.
      • Allow callers to interrupt the sequence ring by pressing #.
  2. In Add Numbers to be called sequentially, select Add a number.

    • Enter the new phone number (repeat for each number).

    • Select the number of times the phone will ring before the call is sent to the next number in the sequence.

      Tip: To prevent voicemail from taking a call in the sequence, change the number of rings. For example, if voicemail starts after 3 rings, set the rings to 2 to prevent voicemail from answering the call.

    • For Answer confirmation required, indicate if users need to answer a call.

      • Select Yes if a person needs to answer to stop call forwarding.

      • Select No if voicemail can answer and end the sequence.

        Optional: In the Regardless of above settings never use Sequential Ring for calls matching section, under Active, select the relevant checkbox(es) or select Add Criteria.

  1. Click Save.

Disable sequential ring

  1. Select Edit Feature.
  2. Select Disable.
  3. In Use Sequential Ring for calls matching the following criteria, uncheck boxes in the Active columns.
  4. Select Save.