Home > Support > Trunk Groups

About Trunk Call Routing

Trunk call routing streamlines call management in AT&T IP Flexible Reach by directing calls to designated groups according to a selected plan. This plan includes properties that determine call handling and destinations.

Note: If you have View Only permission, you can view trunk call routing schemes. If you have Hidden permission, you can’t view trunk call routing schemes.

Routing Algorithms

An Enterprise Administrator applies routing algorithms to choose the order for sending calls through different paths and handle cases when routes reach their maximum capacity.

There are 4 primary rules for trunk call routing schemes:

  1. Linear
  2. Round Robin
  3. Percentage Allocation
  4. Most Idle

Linear

The most basic routing rule is Linear.

The Linear rule decides the order for sending calls to trunk groups. If the first group is full or not working, calls go to the next group in line. This continues until each group reaches capacity.

Round Robin

If a company wants to distribute incoming calls evenly among trunk groups, they can use the Round Robin method.

Like the Linear method, the Round Robin goes through groups in order. But it shares calls evenly among all groups instead of waiting for one group to fill up before sending calls to the next one.

% (Percentage) Allocation

The % Allocation method assigns a portion of incoming calls to each trunk group. Calls are then routed to each group based on the assigned percentage.

If a group is full or not working, AT&T IP Flexible Reach picks the next group based on the % of the remaining groups.

If a group is removed from a % Allocation plan, IP Flexible Reach redistributes its % among the remaining groups in the plan.

 

Most Idle

The Most Idle algorithm directs calls to the least busy trunk group at any given time. Like other algorithms, it provides failover rerouting when the first trunk group in the scheme is unavailable or at full capacity.

Most Idle schemes help evenly distribute active call traffic across SIP trunks by counting active calls and routing new calls to the trunk with the fewest active calls.


Note:
The Most Idle algorithm assumes that all trunk groups will never be operating at or near capacity.